Product Description:

Bauder Kontaktkleber PVC Contact Adhesive is specifically formulated for the assembly bonding of BauderTHERMOFOL membranes on approved substrates. It is ideal for membrane attachment around wall junctions, parapets, skylights, and ventilation units. Approved substrates include plastics (GFK), steel, OSB boards, concrete, and glass. Note: It is not suitable for full-surface bonding on EPS or non-laminated PUR/PIR thermal insulation.

Installation/Application:

Surfaces to be bonded must be clean, dry, degreased, and dust-free. Apply the adhesive with a brush on both sides, possibly applying a second coat on cleaned substrates after allowing about 10 minutes for airing. Perform a touch test to ensure no wet spots remain on the surface, apply the adhesive precisely, and press firmly. Follow safety instructions and close the container after use.

Fire Protection and Health Safety:

Fire response: Flammable Health hazard: Irritant

Properties:

Material: Nitrile rubber and synthetic resin dissolved in fast-evaporating, flammable, organic solvents Color: Yellowish Odor: Typical of solvents Flash point: -17 °C Density: 0.9 ± 0.05 g/cm² Viscosity: Approximately 3500 mPas Consumption: Depending on substrate, 200 to 300 g/m² Storage: In sealed containers for at least 18 months Drying time: Approximately 10-30 minutes Application temperature: Optimal 15-25°C, minimum 5°C